More Money-Saving: Built-in rechargeable battery in headlight can charge with micro USB cable from computer or other devices with USB port. It helps you to save more money, you do not need to buy batteries again
Safer Riding in Night: LED headlight provide 300LM output up to 260 feet lighting distance and 100 fees clearly lighting distance in night. The tail light for free increase and improve the visibility and safety
Longer Runtime: It can support you to go longer with 4 Power-Saving Modes Power (3hr runtime), Standard (4hr runtime), Flashing (6hr runtime) and Eco (7hr runtime). But the rechargeable headlight only takes 3 hours to fully charge
Tool-free installation: There is no need of tools to mount it on or detach it from the bike handlebars. The light fits in your pocket, so you can take it away with you as an ANTI-THEFT measure when your bike is unattended.
Long-Running Time and Rechargeable 1.The Duafire bicycle headlight with USB rechargeable battery which save you hundreds of dollars 2. Easy to recharge from computer, desktop, power bank or anywhere with a USB port. 3.Only takes 3 hours to fully charge and the power will cut-off automatically when the battery is full 4.Running from 3 hours to 7 hours on different Modes: Power Mode(3h)/ Standard Mode(4h) / Flashing Mode(6h) / Eco Mode(7h)
Note: When charging, the blue light will flash until the power is more than 75%; when the power is less than 25%, the blue light also will flash
IPX-5 Water resistant Rain or shine, summer or winter—any weather condition, any time—enjoy enhanced visibility and you will be safe at any time of the day
360 degree swivel Press the quick release button and slide the light forward to detach in seconds, fast and convenient
Easty to Installl, No Tools Required How to install the headlight 1. Open the screw, add the rubber gasket according to your need 2. Put it on the bike handle 3. Fix the screw 4. Fix the light on the base
How to install the tail light Rotate and open the back cover, remove the paper between the two batteries Rotate and close the back cover, press the LED light. Then the light will on. The tail light can be installed on the helmet as a warning light.
There are 2 replaceable CR2032 button batteries
Please Log In before download the Manual & Drivers.